Automatic machine for the use of equipment and maintenance of equipment
1 to keep the electric batch of the lock mouth in the electric batch of sliding sleeve, otherwise it will make the screw is not easy to enter the electric batch of the lock mouth, affect the use of the machine.
2 do not bend the screw conveyor pipe, or w美高梅mgm7991官网-美高梅开户注册平台ill make the screw in the screw conveyor in the course of the card in the bend.
3 must wait for the electric batch of torque to achieve the set torque, after the automatic stop and then lift the batch.
4 if you find the machine did not send a screw to the electric batch of the lock mouth to be locked, you can repeat a bit (press the screwdriver and the power of rotation), so that the machine to send a screw to the power of the lock mouth to be locked.
5 air pressure can not be too large, otherwise it will only accelerate the wear and tear of the mouth of the nose, and the screws will sometimes directly out of the lock mouth.
6 rail vibration force can not be too large, otherwise the screw is easy to be out of orbit in the screw orbit, affecting the stability of the machine.
Automatic maintenance of machine equipment
1. Re美高梅mgm7991官网-美高梅开户注册平台gular cleaning screw bin to ensure clean hopper, suggested in the bin without screw start the machine, with high-pressure gas blowing in the bin and lift nail dust and residue side every day to clean up once.
2 regular cleaning美高梅mgm7991官网-美高梅开户注册平台 of the screw track, to ensure the smooth operation of the screw in orbit.
3 regular cleaning delivery system, ensure the system running smoothly, it is recommended to use a high pressure gun once a week.
4 regular cleaning of the outer surface of the cabinet.
5 please turn off the power when you work or not.